- 1. Australian Cladding & Building Standards Summit
- (Industry News)
- The Second Annual Summit Conference being held in Melbourne from 25-26 June 2018 will be concentrating on the Fire Issues pertaining to dangerous cladding in particular. Details of the event can be found ...
- Created on 03 May 2018
- 2. ASCE Standard for Tensile Membrane Structures (55-16)
- (Industry News)
- Prepared by the Tensile Membrane Structures Standards Committee of the Codes and Standards Activities Division of the Structural Engineering Institute of ASCE Standard ASCE/SEI 55-16 provides minimum ...
- Created on 29 August 2017
- 3. Updated Australian Standards for fire safety
- (Industry News)
- Important revisions have taken place for fire detection and control in buildings across a number of Standards. These set out the minimum requirements that should be in place during design and construction ...
- Created on 21 February 2016
- 4. ABCB Temporary Structures Standard 2015
- (Industry News)
- The Australian Building Codes Board have recently published a new standard for Temporary Structures. The LSAA contributed to its development. This Standard is intended for use in the design, construction ...
- Created on 15 October 2015
- 5. Swimming Pool Safety Barrier Standard
- (Industry News)
- Australian Standard for Swimming Pools A new Australian Standard AS 1926.1-2012 "Swimming pool safety - Safety barriers for swimming pools" has just been released. The objective of this Standard is ...
- Created on 22 February 2015
- 6. BENDING RULES: Augmenting Post-digital Architecture Practice
- (Past Events)
- ... here? What happens when we radically disrupt the security of architecture’s standard reproductive infrastructure? Illustrated through his highly unusual and provocative built work, Kristof Crolla proposes ...
- Created on 05 May 2022
- 7. 2374 Green School Pods - New Plymouth, NZ
- (Medium Fabric Structures)
- ... COLLABORATION, CONSTRUCTION AND MAINTENANCE Being a bespoke membrane structure Cleland Construction Limited had to overcome the different approach from standard construction methodology and Fabric ...
- Created on 18 March 2022
- 8. Flinders University Pedestrian Bridge Upgrade (2021 DA Entry 2082)
- (Footbridges)
- ... barrier solution that would meet today’s safety standards, while adding only minimal structure due to capacity limitations of the existing bridge design. The solution was achieved by constructing a lightweight ...
- Created on 16 February 2022
- 9. Green School - New Plymouth, NZ (2021 DA Entry)
- (Medium Fabric Structures)
- ... CONSTRUCTION AND MAINTENANCE Being a bespoke membrane structure Cleland Construction Limited had to overcome the different approach from standard construction methodology and Fabric Structures & Cleland ...
- Created on 07 February 2022
- 10. Shore School Pool Hall Skylight, (DA 2021 Entry)
- (Medium Fabric Structures)
- ... systems is constantly evolving and with minimal guidance available in the Australian Standards, the system was designed using European design recommendations. We were able to incorporate the local Australian ...
- Created on 03 February 2022
- 11. CommBank Stadium, Sydney (2021 DA Entry)
- (Stadiums)
- ... more cost-effective steel detailing as there was less focus on aesthetics. There are 56 panels of PTFE fabric incorporated into the design, standardized to 10 different types. Typical size of the PTFE ...
- Created on 03 February 2022
- 12. Yogyakarta International Airport, Indonesia (2021 DA)
- (Large Fabric Structures)
- ... are grouped into 21 clusters of 4 cushions. The roof design resembles a native Indonesian flower design, Kawung. FABRICATION The ETFE cushions were designed to Indonesian Standard SNI1727-2013 risk ...
- Created on 03 February 2022
- 13. Memorial Drive Tennis Centre Canopy (2021 DA)
- (Large Fabric Structures)
- ... clay built to International Tennis Federation (ITF) standards), construction of a new sunken show court, player shelters and landscaping, and crowning the project, a 5800m2 lightweight tensile membrane ...
- Created on 03 February 2022
- 14. Stadium Roofs and Bicycle Wheels
- (Stadiums)
- ... since it caters for the standard athletic running track but the bicycle wheel concept is very well suited to a more elliptical form. Many other stadiums need to cater for rectangular playing fields such ...
- Created on 13 September 2021
- 15. LSAA Update on Fire Subcommittee Initiative
- (Corporate)
- ... LSAA aims ultimately to influence the ABCB to change the BCA (2022 edition) to align with the European standard EN 13501.1 classification – this provides a range of combustibility levels, unlike the current ...
- Created on 21 November 2020
- 16. LSAA 2018 Keynote Addresses
- (LSAA Proceedings)
- ... for weaving a new type of high performance material, designing and constructing an ultra-thin stainless-steel shell bridge that sets new standards, or remodelling an energy storage tank so that it becomes ...
- Created on 11 August 2020
- 17. LSAA 2018 Conf and Awards Proceedings (UTS)
- (LSAA Proceedings)
- ... case studies in form finding, analysis and standardisation techniques using Rhino/Grasshopper Alex Leese (Icon) & Elizabeth Nel (The NRA Collaborative) 11.30 Computational Design ...
- Created on 11 August 2020
- 18. Proceedings of LSAA 2009 Conference
- (LSAA Proceedings)
- ... Start End Paper Session: Theme, Activity – Presentation Title Author / Chair S7 Technology Tools and Standards Peter Kneen ...
- Created on 06 August 2020
- 19. Big Dish Solar Concentrator
- (Spaceframes, Cablenets, Glazing)
- ... cored panels has proved to be an effective way of producing shapes with good optical quality. Previous studies (4) indicated that a dish could be built with good optical performance using standard spherical ...
- Created on 02 July 2020
- 20. Dual Skin Safety Net Structure at MLC (2018)
- (Special Applications)
- ... was to provide an architectural alternative to standard, heavy and bulky hoarding protection that is used on construction sites to protect the public from falling objects during remedial works. There ...
- Created on 17 October 2018