- 1. Shadecloth Structures
- (Category)
- ... nurseries have been common in Australia since the mid 1980s. Similar shade structures utilizing seat belt webbing as edge cables have been applied to protect cars from sun and hail in Australia, USA, ...
- Created on 22 July 2015
- 2. Member Profiles
- (Category)
- ... of lightweight structures and are well supported by material suppliers of fabrics, fittings and cables. Members adhere to our Code of Ethics Members with complete service (Design, Engineering, ...
- Created on 09 February 2015
- 3. Medium Fabric Structures
- (Category)
- ... are often of one geometric form such as a conical structure with a central bale ring attached to a mast or tied down. The perimeter could be a series of edge cables, trusses or beams. If multiple units ...
- Created on 13 February 2015
- 4. Large Fabric Structures
- (Category)
- ... and geometrically by straight or curved elements such as arches, edge beams and cables. The prestress forces from adjacent panels often counterbalance and the more efficient structures have a larger degree ...
- Created on 12 February 2015
- 5. LSAA 2013 Auckland Proceedings
- (LSAA Proceedings)
- ... also use modern materials such as fabrics, foils and cables which can only carry loads by tensile forces – the most efficient load carrying action. This conference will look at the most efficient use ...
- Created on 10 August 2020
- 6. Proceedings 2008 Seminar
- (LSAA Proceedings)
- ... Manager Ronstan Architectural and LSAA Secretary with specialist knowledge of cables and fittings needed in most structures. Peter Lim – Managing Director, Tensys Engineers - Specialist Consultants for ...
- Created on 06 August 2020
- 7. Carols by Candlelight Melbourne
- (Blogs and Posts)
- ... in Montreal and later the best known roof for the main stadium for the 1972 Munich Olympics. The shape of the surface is defined by the orthogonal grid of opposing pretensioned cables that form a double ...
- Created on 24 December 2018
- 8. Carols in the Domain - Demountable Stage Canopy
- (Blogs and Posts)
- ... near each corner of the stage. Diagonal cross cables spanned between the opposite mast heads and a long front edge cable gave an uninterrupted view of the stage area. From direct measurements ...
- Created on 23 December 2018
- 9. New Perth Optus Stadium Community Arbour Walk (2018)
- (Special Applications)
- ... with tapered bases. In total over 3,500 artwork panels, perforated with designs inspired by local indigenous groups, are supported by nearly 15km of stainless steel cables and clamps. At the bases of the ...
- Created on 13 October 2018
- 10. Playford Bowls Club Triple Green Roof Cover Project (2018)
- (Large Fabric Structures)
- ... sawtooth covers form is generated from inclined parallel arches, braced to each other, utilizing valley cables between the arch pairs to provide the fabric with shape and stability. The arches are supported ...
- Created on 13 October 2018
- 11. Wellington Bowling Club Greens Cover Project (2018)
- (Large Fabric Structures)
- ... system. Refer drawing (DWG 1001) A series of tie cables radiating inwards from the perimeter ring beam and corner arches forming ridges and valleys at differential heights provided for stability and ...
- Created on 13 October 2018
- 12. Enclosure for Sumatran Tigers Project (2018)
- (Spaceframes, Cablenets, Glazing)
- ... catenary cable boundaries connected to masts with tieback cables and is pushed / pulled up with 4 flying masts in each enclosure. The flying masts are supported on a structural cable net that is attached ...
- Created on 13 October 2018
- 13. Yeppoon Shade Structures Project (2018)
- (Shadecloth Structures)
- ... Tensegrity with a cable grid spaning an area of 19m x 22m was designed to minimize the size of the structure flying over the skate park and its visual impact. Perimetral catenary cables tension an SS cable ...
- Created on 13 October 2018
- 14. Hyper Coaster Queueing Canopies Project (2018)
- (Entrances and Canopies)
- ... was tensioned with custom made cables with stainless steel terminations. The design detailing allowed for adjustment of fabric tension through cable adjustment which meant that fabrication tolerances ...
- Created on 12 October 2018
- 15. Ryde Shopping Centre Travelator Canopy Project
- (Small Fabric Structures)
- ... catenary edge cables spanning the free edges of the canopy and it is clamped to steelwork using rope track extrusions. Extrusions were conically rolled to match the clamp plates on the CHS steelwork rings. ...
- Created on 11 October 2018
- 16. Australian Catenary Lighting for Super Bowl 2017 in Houston TX
- (Member News)
- ... Lighting is based on “less is more”. The cables allow light to be focussed in areas that need it, leaving other places in darkness and building character, something conventional lighting struggles to ...
- Created on 30 August 2017
- 17. Mary McKillop College Amphitheatre
- (Small Fabric Structures)
- ... after and our preference for only the best materials available we use the premium Ferrari 802s for this project. Galvanised cables with Stainless steel connections along with galvanized and painted steel ...
- Created on 21 September 2016
- 18. Canteen Canopy Extension
- (Small Fabric Structures)
- ... College Team: SEMF, SEMF, Walsh Industries (Steel), Horizon Sailmakers (Membrane & cables) The design brief was to Install an extension to an existing large (1550 sq m) canopy over a small area of ...
- Created on 21 September 2016
- 19. Catholic College Bendigo
- (Medium Fabric Structures)
- ... membrane was assembled with clamp plates and cables and lifted into place and the corners connected to the perimeter posts. The overhead safety cables were installed and the membrane tensioned back to ...
- Created on 21 September 2016
- 20. Laneways Canopy
- (Medium Fabric Structures)
- ... Frequency welders used on the FX901. Collaboration Significant collaboration was required between existing underground services (data cables, sewage, stormwater pipes, power etc), local council requirements, ...
- Created on 21 September 2016