Entrant: MakMax Australia

• Category: 4  ID Number:  #4302

• Location: Brisbane Domestic Airport

• Client: Brisbane Airport Corporation

• Completion Date: June 2012

APPLICATION OF PROJECT: Pedestrian bridge roof, open air.

PROJECT DESCRIPTION:

This airport terminal access project involves the construction of a major pedestrian bridge linking a new multi-level car park and train platforms to the terminal building one of the country’s business airports.

This covered walkway project is part of a larger group of construction projects which serve to improve all pedestrian and vehicular traffic at the airport.

Our client requested design, fabrication and installation of the tensioned membrane roof system. The purpose was purely weather protection for pedestrian traffic on new pedestrian access bridge.

Award of Excellence LSAA 2018 Design Awards Large Structures (Cat 4, 4101)

Application: Bowling green tensile membrane roof

PROJECT DESCRIPTION:

The overall project was specifically conceived and designed to provide a community meeting point to focus and reinvigorate the residents of a depressed suburb which had been in steady decline for more than 30 years. Many residents of this suburb are elderly and due to transportation access and costs seldom left their homes, hence social integration and community interaction was poor. The additional aim of the project was to have the elderly and young be involved in community based sports and activities to invigorate, inspire and bond fellow citizens.

Entrant: Global Fabric Structures (UFS)

Location: Sydney
Client: Thiess Australia
Completion Date: December 2012

PROJECT DESCRIPTION:

The former HMAS Platypus site is nestled below the suburb of Neutral Bay, Sydney Australia on a quiet harbour inlet.

This site has been an integral part of the history of Sydney Harbour since the early 1800's. A gasworks, a workshop for servicing torpedoes and a base for Australian Submarines have a left a contaminated industrial site that is excavated out of sandstone and spread over several levels.

Entered into the LSAA 2011 Awards (Cat 4, 4610)

PROJECT DESCRIPTION

Sheltered below an innovative woven timber canopy, new amenities for visitors to the Waitomo Caves includes tourist gathering areas, 250-seat dining, retail, seminar and exhibition areas as well as a café and theatre for Tourism Holdings Ltd (Fig.1). (Note: These Figures / drawings are not available)

The cave entrance is accessed from the car park on the upper path while a lower path returns the visitors back alongside the stream exit (Fig. 2). Between these paths the amenities were accommodated within a simple base structure that extended the contours of the land (Fig. 3). The form of the base is distinguished and separate from the curved geometry of the overhead canopy.

Entrant: MakMax Australia

• Location: Taif City, Kingdom of Audi Arabia

• Client: Taif City

• Completion Date: March 2013

Judges Comments:

"Well integrated and designed perfectly for its place."

"This looks to be very successful integration of lightweight elements with solid architecture. There's no sense that the roof has been conceived independently of the rest of the theatre. Lovely tent-like effect; very effective use of pattern on the 'fly sheet'."

PROJECT DESCRIPTION: Decorative roof, culturally significant

The purpose of Souk Okaz Public Theatre was to deliver both a functional public space for cultural activities and evocative ambience reminiscent of the ancient pre-Islamic era of a bustling Bedouin market place.

LSAA 2011 Design Award Entry: Cat 4 (4321) Auckland, New Zealand

APPLICATION OF PROJECT:

The Cloud is a semi permanent multi purpose event & exhibition structure, initially developed for the Rugby World Cup

PROJECT DESCRIPTION

The Cloud is a semi permanent structure erected on the western edge of Queens Wharf to accommodate the city's commitment to hosting an inner-city fanzone, festival and showcase event during the Rugby World Cup 2011. Installed as part of the recent 18 month redevelopment of Queens Wharf, The Cloud will be utilised by NZ2011 to showcase the best of New Zealand innovation and creativity during the REAL New Zealand Showcase. At almost 180m long, The Cloud can accommodate up to 6,000 people.

Mehler Coated Technical Textiles supplied large quantities of coated fabric for the 2015 Milan Expo.

The major application was for sun shading the two main axes of the Expo. The 85,000 sqm of fabric was essentially planar rectangular panels attached to opposing valley and ridge cables.

One important concept behind the simple forms was the re-use of the fabric following the Expo.

Other projects included:

• Iranian Pavillion (2,500 sqm)
• Ferreo Pavillion (1,600 sqm)
• Institution Bologna Pavillion (4,500 sqm)
• Tent at the entrance (6,000 sqm)

For further details see HERE

Entered into the LSAA Design Awards 2007 (Large Structures, 3195)

Entrant: Oasis Tension Structures
Client: Multiplex Constructions (Vic) Pty Ltd
Architect: Darryl Jackson Pty Ltd
Structural Engineer: Tensys
Specialist Consultant(s): Drafting Steel One
Builder: Oasis Tension Structures (Australia) Pty Ltd
Fabricator(s): Atkins Fabrications Pty Ltd Structurflex NZ, 
Geelong Fabrications, Ronstan

Aside from the images below, no other details have been entered for this project.

LSAA 2011 Design Award Entry (4210)

APPLICATION OF PROJECT:

Canopy shade structure: The architectural PTFE membrane canopy provides weather protection for an outdoor events plaza and exterior walkway.

PROJECT DESCRIPTION

A truly stunning piece of fabric architecture was created with this stunning lightweight membrane roof at ITE College (West) in Singapore. Supported only by a complex cable system and large steel wall plates bolted to 4 different buildings, the 3000m2 PTFE Canopy provides shelter to the Events Plaza and exterior walkways below spanning an incredible 75m span in one direction and 45m in the other.

APPLICATION OF PROJECT

Airport terminal drop off area roof

The New Yogyakarta International Airport (NYIA) Description

The new Yogyakarta International Airport (NYIA) at Kulon Progo Regency, serves the Yogyakarta Special Region, Indonesia, and is operated by Ankasa Pura. As part of the airport development, Fabritecture was contracted for the design & supply of ETFE pneumatic roofing as well as supply system and ducting.

The ETFE component of the roof comprises 84 2-layer cushions covers a plan area of approximately 14,314m² and is part of an overall canopy integrating polycarbonate elements also, overall providing 18,900m² of weather cover the exterior drop-off area.

Entrant: Light Weight Structures

• Location: Neath Street Cessnock NSW

• Client: East Cessnock Bowls Club

• Completion Date: September 2012

APPLICATION OF PROJECT:

The project covered one Bowling Green measuring 1820 sqmts. The project was designed to offer weather protection to bowlers, including night time use of the Bowling Green (in a residential setting) and minimal cleaning maintenance over the life of the structure.

Entered into the LSAA 2016 Design Awards (Cat 4, Large Fabric Structures #4114)

Entrant: Fabritecture (Designer and Installer)

Location: The Esplanade.   Completed: 2016

Client: Scentre Group (Westfield)

Team:  Scentre Group (Westfield), Wade Design, Textile Fabrication Services, Fabritecture 

 Application

Statement architectural fabric structure with complex steel geometry and state-of-the-art LED lighting system as part of a $670 million redevelopment of Pacific Fair Shopping Centre on the Gold Coast.